LATEST CREATION IN TRIMEX GROUP

SOLID ELASTIC RUBBER WHEELS ALLUMINIUM RIM.

THE ELASTIC RUBBER TYRES IS MADE OF A SPECIAL RUBBER COMPOUND.

These wheels are specially recommended when there are necessity to protect the floors, need of antivibration wheels with high load capacity, high confort of working and excelent resistance to the largest part of the agressive substances.

Solid tyres are produced in black and gray colour with an excellent behaviour between -30° and +100°.

An excelent index of the roll resistance added with an high index of resistance to the abrasion put this Wheel among the more suggested in the sector of food, industry and HORECA.

DECLARATION of CONFORMITY

Article:

TR 0074-005

Load capacity:

  • dynamic: 500 kg (EN 12532)
  • static: 625 kg (EN 12532)

Wheel:

  • Wheel diameter: Φ200 mm
  • Tread/tyre: Elastic solid rubber (black)
  • Rim: Aluminium
  • Hardness: 65±5 ShA

Weight:

1.360 kg

Accessories:

– /

Statement of conformity

Based on test results using appropriate standards, the products are in conformity with:
  • EN 12532 – 1998 – Castors and wheels – Castors and wheels for applications up to 1,1 m/s (4 km/h)
  • EN 840–5 – 2013-02 – Mobile waste containers – Part 5: – Performance requirements and test methods (conformity with 4.7.5, 4.9.2, 4.9.3, 4.11.4)
  • REACH: we confirm that in production of our articles none of the substances listed on SVHC list is intentionally added.
  • PAH: we certify, that during the manufacturing of our products, we do not use or intentionally incorporate into them any of Polycyclic aromatic hydrocarbons (PAH´s).
Samples tested according to standards:
  • EN 12527- 1998 – Castors and wheels – Castors and wheels for applications up to 1,1 m/s (4 km/h)
  • EN 840 – 5 – 2013-02 – Mobile waste containers – Part 5: – Performance requirements and test methods
  • Rim material: Made of cast aluminum. Material quality is certified by the supplier for every batch and also approved before production.

Solid rubber wheels dia. 400 for baggage trolley

This wheel has been developed for the use on GROUND SUPPORT EQUIPMENT applications like small containers loaders, baggage Trolley, slave pallets, baggage carts  and trailers.

The wheel load capacity is conform to ETRO standard and it is provided for different speeds.

The load carrying capacity of this wheel applies to transportation service on a maximum distance of 10 km covered within 1 hour at a maximum speed of 25 km/h and the maximum journey does not exceed 2000m.

Ruota per carrelli aereoporto

Data sheet

ARTICLE: TR 400.001

Wheel diameter: Φ400±2 mm
5mm steel rim with screws and self locking washers
black rubber ring 80±5 ShA

Accessories:  Larghezza del pneumatico: 100 mm

Load capacity: This tire conforms to ETRTO standards with respect to the given loading capacities:

The load carrying capacity of those tires applies to transportation service on a maximum distance of 10 km covered within 1 hour at a maximum speed of 25 km/h (average spe ed lower than 10 km/h) and the maximum journey does not exceed 2’000 m.

Temperature range: -40°C to + 65° C

Weight: 12,9 kg

Quotation request